Fitur

▲ Menggunakan roda rotasi lebah baru dan desain hemat energi ramah lingkungan yang canggih, mengatasi kekurangan pembentukan lebah tradisional yang sulit, mahal, mudah aus dan cepat merusak;
▲ Luar udara tambah pendingin, memastikan suhu udara keluar kering yang lebih rendah, meningkatkan efek penghapusan paparan;
▲ Memperpanjang umur cetakan, mengurangi korosi, mengurangi cacat produk dan tingkat limbah;
▲ Menggunakan sistem kontrol suhu PID, dengan pengaturan suhu regenerasi dan fitur tampilan suhu aktual;
▲ Memiliki fungsi perlindungan seperti overheating, power reverse, motor overload.

▲ Honeycomb rotor is used to ensure constant air dehumidification effect
▲ Outlet equipped with cooler, the outlet air temperature, dry to ensure low increase in addition to the effect
▲ Inhibits corrosion and prolongs service life of the mould, and yet reduces moulding cycle time
▲ Supplied as standard,a return air collector is used to collect return air from the moulding area back to this machine and to form a closed-loop air circulation, which is particularly practical in tropical climate
▲ Accurate control and display of regenerating temperature using PID Control
▲ Have over-temperature, and the power phase sequence errors, such as motor overload protection function

Profil Produk

Mesin dehumidifier cetakan seri WHMD terutama diterapkan dalam pembentukan plastik, masalah pengengkapan yang timbul karena cetakan menggunakan air beku untuk memperpendek siklus pembentukan, terutama PET botol embrio suntikan yang paling cocok. Mesin ini menggunakan sistem roda rotasi lebah untuk operasi dehumidifikasi, memastikan lingkungan udara titik embun rendah 0 ~ 10 ° C di sekitar cetakan, tidak membiarkan cetakan menghasilkan fenomena paparan dan tidak dipengaruhi oleh perubahan musim, mengurangi tingkat buruk secara signifikan.

The WHMD series mould sweat dehumidifiers are designed for the inhibition of moisture sweat from condensing on the mould surface Forming of moisture sweat on the mould surface is due to the use of chilled water for reducing the moulding cycle time, particularly while moulding of the PET preforms To bring about the moisture sweat on the mould surface is because the mould surface temperature is lower than the dew point temperature of surrounding air, the water vapor comes into being, then causes corrosion of mould and effects quality of moulding parts as well as production efficiencies. This series of machine uses honeycomb rotor to carry out dehumidification function，which generates a dry airflow with dew point ranging from 0～10 ℃ and ensures the surrounding air of mould remaining in a low dew point temperature It provides constant low dew point surrounding air to the mould surface all year round without being influenced by the change of seasons.